Anyconnect For Mac Os X

Anyconnect For Mac Os X

2020. 10. 30. 13:05ㆍ카테고리 없음

The Cisco AnyConnect VPN Icon shows up on the top bar and if you hover your mouse over it, it will say it’s connected. Disconnecting from the Cisco AnyConnect VPN client. To disconnect from the AnyConnect VPN connection on a Mac OS X system: Click the Cisco AnyConnect VPN Client Icon in the top bar and choose “Disconnect.”. Free to try Free Connected Mac Version 34.0 Full Specs. Download Now Secure Download. Key Details of X-VPN. OS X El Capitan OS X Yosemite.

NOTE: If you have an FBRI-provided Mac, the Cisco Anyconnect Client is already installed. Please skip to Starting the VPN Client below.

Installing the VPN Client

Download the AnyConnect VPN client for Mac OS X:
In your Downloads folder, double-click the file you just downloaded to open it. An icon will appear on the desktop called AnyConnect, and a separate window will open.
Double-click on AnyConnect.mpkg to run the installer, then follow the steps to complete the installation.
When you see this screen, UN-check everything with the exception of VPN: (VPN option grayed out? Go here.)
- Starting with macOS 10.13 High Sierra: During the installation, you will be prompted to enable the AnyConnect software extension in the System Preferences -> Security & Privacy pane. The requirement to manually enable the software extension is an operating system requirement.

Starting the VPN Client

NOTE:The VPN will not connect if you are connected to the FBRI wired or wireless network.

In your Applications folder, go to the Cisco folder and double-click the Cisco AnyConnect Secure Mobility Client.
Enter vpn.vtc.vt.edu in the Ready toConnect to field, then press the Connect button.
Enter your FBRI username and password, then click OK.
A banner window will appear. Click Accept to close that window. You are now connected!

Disconnecting the VPN Client

When you are finished using the VPN, remember to disconnect (failing to disconnect can result in being unable to access resources if you are on-site at the Research Institute).

Click the AnyConnect client icon located in the menu bar near the top right corner of your screen.
Select Quit.

Topics Map > Networking > Virtual Private Networking (VPN)

This page contains links to download and installation instructions for VPN software for Mac OS X

University of Illinois students, faculty, and staff can use these directions to set up their Mac OS X computers or devices to connect to the Virtual Private Network (VPN).

If you have a guest account, Technology Services recommends IllinoisNet Wireless for on-campus use. Contact your host for help downloading and installing the VPN if you need guest access for off-campus use.

Quick Start

Download the Mac VPN installation package from WebStore.
Install the software with administrator privileges.
VPN server: vpn.cites.illinois.edu
Username: Your NetID
(or, if you're a guest, your guest ID)
Password: Your Active Directory password
(or, if you're a guest, your guest password)
Group: 1_SplitTunnel_Default
(Note: This is the most common choice. See About VPN Profiles for information about the alternatives, such as Tunnel All for access to Library and WebStore resources.)

Detailed instructions are provided below.

Downloading the VPN software

Download the Mac VPN installation package from the WebStore.
Save the file at an easily findable location, such as your desktop.

Installing the VPN software

Go to the location where you saved the VPN installation package.
Double-click on the .pkg file.
The AnyConnect Installer will launch. Click Continue.

Accept the End User License Agreement (EULA) when prompted: First click Continue, then Agree.

If given a choice of which packages to install, select only the VPN item and click Continue. Depending on the installer you might not be given a choice.

The installer will estimate how much space is needed. Click Install.

You'll be prompted that Installer is trying to install new software.
NOTE: This prompt is not asking for your NetID; it asks for your local user name and password on that specific computer.
- Enter your local user name.
- Enter your local computer password.
- Click Install Software.

After the software is installed, you'll receive the message 'The installation was successful'. Click Close.

After installation is complete, your Applications folder will have a new Cisco subfolder containing the AnyConnect VPN.

Starting the software

After you've completed downloading and installing, the Cisco AnyConnect VPN software will be installed in the Application folder's Cisco folder.

Cisco anyconnect vpn client for mac os x

Logging in

When you launch the Cisco AnyConnect client, you'll be prompted to enter the VPN server you wish to connect to.

Enter vpn.cites.illinois.edu.
Click Connect.

When the connection process begins, you'll be asked for three pieces of information.

Group: 1_SplitTunnel_Default
(Note: This is the most common choice. See About VPN Profiles for information about the alternatives, such as Tunnel All for access to library resources.)
Username: Your NetID
(or, if you're a guest, your guest ID)
Password: Your Active Directory password
(or, if you're a guest, your guest password)

Note: If you want to access Library resources without logging in to the Library Gateway, you should change to the Tunnel All profile.

When the VPN connects, a new icon will be added to your dock. The icon will show a lock image while the VPN is connected.

Disconnecting

When you're done using the VPN connection, disconnect it.

Click on the AnyConnect VPN icon in your task bar.
In the window that appears, click Disconnect.

Troubleshooting and the Statistics window

The Cisco AnyConnect VPN client gathers information that can help you with troubleshooting speed or connectivity issues. It may be helpful to open the Statistics window while troubleshooting with the Help Desk.

To open the Statistics window:

Click the graph icon toward the lower left corner of the VPN window.
Choose among the tabs as directed to help your Help Desk consultant with troubleshooting.